Menu
Your Cart

DotShell for DotAIO

DotShell for DotAIO


DotShell takes the basic concept of the VapeShell and elaborates, incorporating also some elements out of DotAIO stock components.

The design utilizes the top part of DotAIO’s stock reservoir, incorporates an adaptation of DotAIO RBA’s AFC system, but also offers a surprisingly large deck with real time access potential and further customizable air flow under coil.

The deck is able to host many different approaches of one-coil rebuilding, from simple round wire to large exotic coils, still retaining high tank capacity (a bit higher from Dotmod’s RBA version).

The air flow is adjusted by an AFC base section with high accuracy which dials in the air hole under coil from zero to either D=3.8mm (stock Pos Tube) or D=2.0mm (spare Pos. Tube).

There is an MTL set of pins further available as an accessory, which, as with the VapeShell, further customizes the air flow for proper true MTL setups.

This makes the DotShell versatile and perfect for a wide range of vaping profiles, from MTL to DTL.

Add to the above Dotmod’s auxiliary 510 base for testing, rebuilding, dry-burning or other purposes and you have the whole package.

You can’t get wrong with the DotShell: Its features and potential bring the already successful DotAIO to a totally different level.


Features:

  • Air flow tuning via an AFCS Ring adjusting from zero to either D=3.8mm (stock Pos Tube) or D=2.0mm (spare Pos. Tube). Fine tuning with accessory MTL pins kit D=1.0/1.2/1.5mm
  • M2.5mm pan head Philips post screws.
  • 12.2mm post-to-post length, ~8.5mm post-to-post net space, ~8.0mm coil space.
  • Max. net coiling height in the chamber 4.2mm
  • Chimney top inner D ~4.0mm
  • Height ~35mm (AFC section attached, Rebuild Base excl.) 
  • Weight ~25g (AFCS section attached, Rebuild Base excl.)


Wholesale only for Greece and Cyprus

Write a review

Note: HTML is not translated!
Bad Good
Captcha